Friday, April 15, 2005

How to configure

Hi,
with substantial inputs from ILUGC, i configured my UT 300 R modem in just a few minutes.
Here in this blog, i will put the details down with pictures.

153 comments:

Srinivasan Kasyap said...

HI Varun, This is Srinivasan From chennai who have BSNL internet account, and have the UTSTAR 300R2 ADSL modem, now i have 2 computers at my house and have purchased the D-Link ADSL router, DSL-502T model, can u help me to configuret the router, im unable to do that

Varun Soundararajan said...

Hi, Mr. srinivasan, i have replied u, check mail.

Ram said...

Hello Varun

This is Ram from chennai, your post was extremely informative, unfortunately I have the UT-300R2 modem and the whole user interface is diferent. would appreciate if you have any inputs for configuring the same. my email is
sramji (at) gmail.com. Thanks in advance

Varun Soundararajan said...

hi,
i dont have access to the UT300R2 modem, but i if i find any, i will post it here ASAP.
bye
-Varun

Varun Soundararajan said...

I found a message by bfii here:
vinuthomas site
check out (its near the end of thread, one before my post).

ganesh said...

hi,
can u please email me the firmware for UT300R...to ganeshcp AT gmail. Thank u. :)

drtvasudevan said...

hi varun, this is dr tv from cuddalore.
thanks for the very informative blog. it was just what the doctor ordered at the nick of time.
however i wondered a lot how you got to the first place -that of log in screen.
i read the manual and found that one opens the browser and types192.168.1.1
the default log in user name nad the pw is also given in the manual.

thanks a lot.

Varun Soundararajan said...

Hi drtvasudevan,
once you get your modem connected to your PC, you have technically a LAN, in which there are only two nodes (your PC and the modem). Your modem has an IP, which happens to be 192.168.1.1. There are settings by which the modem's IP can be changed from the modem's control panel (ie., the pages after logging in). You can comment here, if u have any qns.
Bye,
Varun

tv said...

was also just wondering if one needs to be root to do this.
when i was trying in yoper (my first sttempts) it said access denied.
this morning i tries in suse after bringing the terminal up and typing su then giving the root pw; the access was given.
have not gotten to configure it fully though.
doing some big downloading.
went to dataone mail site and changed my pw and the connection got cut in a couple of minutes.
thought it was general shutdown but found out that this pw is stored in the modem (router)and should not be changed.
had to get it changed back to the original.
now it works.
meanwhile my download got disrupted.
:(
tv

Kannan said...

Hi Varun,

I'm Kannan from Chennai. It was really interesting to read abt the BSNL Broadband Modem installation.
I am having a Sify broadband(if you can call it so)connection. This connection dosen't have any modem and the speed ( I have taken a 128kbps)is not at all good and the charge is too heavy(Rs.900 for on month.

I planning to switch to BSNL Broadband. I would like to know what modem I should buy. I would probably be buying this in USA. Price is not a factor. Please let me know the type and name of the modem to be bought. Do I also need a splitter along with it? Can I get the splitter here or do I buy it along with the modem.

Please let me know these details and I would really appreciate if you could mail me these details at kanna_kasturi@yahoo.com

Thanks,

Kannan.

Anonymous said...

Hi Varun,

I intend to activate the PPPoE feature of the UT-300R2 modem. However, can you please tell me how can I get back to the set up that I originally had when BSNL supplied me the UT-300R2 modem in case there is any problem. My email address is parthass(at)yahoo(dot)com

Shreenivas said...

I have a Dishnet DSL Aztech DSL 100U modem how to configure it to BSNL

Anonymous said...

hi varun, i am sweety . i have bsnl utstar200r2 adsl modem. i want to install it in linux. how can i do that.i need help. my email id is sweet_salt85@yahoo.com

allen pradeep said...

hi, This is allen frm chennai. i have dataone connection at home(modem: UTSTAR 300R2).. i'm having a system with dual boot os(WinXP and Fedora core 3) The ethernet card i'm using is sis900 which came along with my motherboard... i have no problems with winxp for connecting to internet.. bt i couldnt connect to internet with fedora... i'll be grateful to u if u provide step by step instructions for connecting to internet.. i'm a linux novice user.. my mail id is allenpradeep@gmail.com.. thanks in advance... thank u very much

ME Ramchandran said...

Hi Varun,

This is Ramchandran from Chennai..
I have the Huawei SmartAX MT841 USB modem (given by BSNL these days) for connecting to the internet.. A lot of posts on the net deals only with ehternet (& dialer) modems.. Mine is a preconfigured , USB modem.. I run Fedora Core 5. Please help me in configuring.

Anonymous said...

Hi I am using UT300R2U supplied by MTNL who have replaced its firmware by their own limited firmware which does not give access to Advanced features. Can you please email me the original firmware for the same if possible at : bhatns@mtnl.net.in

Thanx

Sriram Murali said...

hello varun, i have this utstar ut300R modem and the setup now is an always on connection. is there any way for me to get it back to a PPPoE connection. when i try sudoing pppoeconf on my ubuntu box, it says "I scanned more then one interface but the access concentrator of your service provider failed to respond. Another reason may be another pppoe process controlling the modem". i have also tried resetting the modem in vain :(

srinivasan said...

I am not able set up AZTECH 100U adsl modem on winXP with BSNL chennai.
It worked fine with 98SE when using it.

Recently upgraded to XP and I am not able to connect.

This is what I tried ---
After installation of modem etc using downloaded rfc1483. Opened ADSL modem 'configure' from 'start/programs'
I got
LLC Bridge encap,
G.DMT etc. OK,.....
but unable to give VCI a value '0'. It does not aceept
Get error message saying "value must be between 32 - some xxx " (I dont remember)

Can some one help with this XP setting and other network settings to get connection going.

abhijith said...

HI.. I am abhijith from mysore doing 12th.. recently i got Bsnl broad band connection.. and have the
UTSTAR 300R2 ADSL modem..given by bsnl..
now i am connect from usb.. but i want to try connecting from internet.. but i am not sucessfull doing it.. i use win xp and it is not recognizing when connected from ethernet..
so i request u all to help me out and gimme a solution so that i can connect from ethernet
i thank u all in anticipation..

with regards

abhijith
abhijithmail@gmail.com

sumith kumar said...

Hi,
iam sumith from banglaore.
i need a procedure to install UTSTAR 300R2 ADSL modem usb driver on pcquest linux(kernel version 2.6.15-1.1831_FC4



i would be greatful if somebody throughs some light on the above

sumith kumar said...

Hi,
iam sumith from banglaore.
i need a procedure to install UTSTAR 300R2 ADSL modem usb driver on pcquest linux(kernel version 2.6.15-1.1831_FC4



i would be greatful if somebody throughs some light on the above

9:01 PM my email id is sumith_944@yahoo.co.in

Shailendra said...

HI Varun, This is Shailendra singh From kota rajathan who have BSNL internet account, and have the UTSTAR 300R2u ADSL modem, now i have 2 computers one desktop other laptop intel centrino at my house and have purchased the linksys wireless wrt54gc broadband router, ijust wanted to connect my laptop and computer wirelessly throug my modem to internet can u help me to configuret the router, im unable to do that

shubham said...

please give me step by step instructions to install UT300R2 modem


you can mail me at:

coolshubh4u@yahoo.co.in

Subhash said...

Please give me step by step configuration for UT-300R2U. I am having BSNL home plan and want to use the connection for a PC and a Laptop from home.

I am not able to connect using USB on Windows-98.

On my laptop, I am having Windows Vista and I am not able to install USB driver for the same which is provided by BSNL on CD.


My email id is gadodias@gmail.com

Anonymous said...

he guy i can format my computer . then how can i use the dataone ut-300r2u modem please tell me and send me its drivir . nitininsane.cool@gmail.com

rajesh said...

Hi I am Rajesh Kumar from Haryana I have a Huawei MT841. I am facing problem to install driver in Windows Vista Business

Rajesh Kumar

praveen said...

Can anyone using utstar 300r2 modem upload the firmware. You can login to
http://192.168.1.1/
user: admin
pass: utstar
Goto Admin > Local Image Upgrade
and dump your firmware to file and send it to me on praveenpious@gmail.com

Suprabhat said...

Hi this is suprabhat here can u please tell me how UT 300R2u will work with windows vista cause i am not able to explore it

Anonymous said...

hi,

i am rahul from chennai. i have got the BSNL home plan. some tech guy came today and connected a UTStarcom UT300R2U modem for me. however, i am not able to figure out how to get it configured.. i did not receive a cd, or a manual or anything! :(

i am literally ripping my hair out trying to download a USB driver for it.. but i have been unsuccessful so far.. could someone please give me step-by-step instructions on how to get it working?

my email id is great_raisin@yahoo.co.in

Varun said...

Hi varun,
I am varun from bangalore. I got dataone connection about 4 months back. They gave me UT-300R2U modem.
The internet connection is very unstable. Nowadays I am even unable to upload say about 10mb of data to the net.
Everyone asked me update the firmware, but I am unable to get it on the net even after repeated attempts.
Can you please tell me wat I am supposed to do. If you have the latest firmware can u please mail to 20.varun@gmail.com
Can you please tell me the procedure to update the firmware.
Thank you

Anonymous said...

i need usb driver for utstarcom 300r2u adsl modem
pls email them at ravi.grover11@gmail.com

vfor said...

Hi,
This venky from Nellore, Andhra Pradesh.

I want your service center postal addresses in Chennai & Hyderabad.

Ragavan said...

hi varun,

my name is ragavan frm chennai,bsnl BB user...i have a adsl2+ router of UT300R2U.
prob is i dont have virtual server setup and port triggering option under advance setup --> nat. it ha just dmz host..due to that i cant port forward.
giving u further details of router..

Board ID: 96338L-2M-8M
Software Version: 3.08.BSNL_02.01.02_tr64.
Bootloader (CFE) Version: 1.0.37-8.7
Firmware Version: UT300R2U.0011.01
Hardware Version: UT300R2U 2.2
Model Name: UT300R2U

hw to correct this...
my mail id is citiindian@gmail.com

Dr Bashir said...

Hello..
I have got my laptop compac hp V6000 loaded with windows vista basic. Now I am not able to load the driver of SmartAX MT841 on it which is provided by BSNL. This moden is working fine with my desktop, with windows XP Professional.
Please Help me, in connecting my note book to DataOne.
My email Id is.
dr_bakhan@yahoo.com.
Thanks.

twinkle said...

hi varun myself twinkle please tell me some things about home plan 250[startup]. >what is the meaning of minimum hire period of three months. >what is the meaning of discount payment of 2500.

experto said...

Hey Varun,

You seem to be hero of this thread :D Hope You will be able to help me.

I am sharing cable internet connection in my 3 desktops via this dummy switch and proxy. Which doesnt satisfy me. I want to configure my n/w using router then swtich and then these three pc. I have also lost driver for this UT-300R2U. Could you please help me in configuring this device and getting me driver?

Please guide me step by step. :)

Anonymous said...

Hi.this is nishant here, i got a dataone connection which runs absolutely fine wid Xp but d modem doenst install on Win 98 i.e i cant connect my modem to d pc, even d 192.168.1.1 doent work coz d modem driver is not installed i guess, Can anyone help
my email is
nberia_bindaas AT yahoo DOT com
Thnks

Anonymous said...

for windows 98 u need special software to connect to net using BSNL broadband. Just use ethernet port to connect your router and problem is reduded to one half. Then use a third party dialer to dial to ur isp. if u need more info just drop a mail to me at warlordsbattledemon@yahoo.com

deepak said...

i am rahul from chennai. i have got the BSNL home plan. some tech guy came today and connected a UTStarcom UT300R2U modem for me. however, i am not able to figure out how to get it configured.. i did not receive a cd, or a manual or anything! :(

i am literally ripping my hair out trying to download a USB driver for it.. but i have been unsuccessful so far.. could someone please give me step-by-step instructions on how to get it working?

Bonnie said...

hello guys,
i just got a bsnl broadband service for my computer, and the am having problems setting up the connection. The adsl router that the bsnl people have given me is the UT-300R2U. I have Windows 98 as my OS. I have decided to connect the router through the ethernet cable, but i can't get the connection made because i don't know how to do it in Windows 98. If anyone here could please help me, mail me at wiresnlocks@hotmail.com
thanks a tonne!
Anant Sharma, Kolkata

darshan said...

hi varun,
darshan here,i m frm gujarat,
just before 5 days igot my b.b. connection frm bsnl with asdl2+:ut300r2u modem.
but i cant able to connect my modem with usb port so can usolve my problame?
thanking you...
darshan my email id is darshan_khandar@yahoo.com

rakesh shetty said...

I Hv Huawei SmartAX MT 841 xDSL Modem. I Lost driver CD pls help how to download the USB Drivers of it.

jamsheed k said...

hi varun,
i too have a UT300R2U DSL modem.
how do we give the user name and password of the internet connection.i mean BSNL account.

Anonymous said...

Please give me step by step configuration for UT-300R2U modem. I am having BSNL business plan and want to use the connection for a PC. I am not able to connect using USB on Windows-2000.

My email id is kannan@scopeknowledge.com
Thanks

Its Time 2 B Crazy !! said...

HI , I have UT300RTU ADSL modem , iam using the single connection by connecting the router to hub then to two PC's . I am able to access the net by setting the router in Router mode by saving ID and password in the router. But, sometimes when i switch off the router suddenly i.e in case of power failure.. the default BSNL settings are coming up and i have to reconfigure.. whts the solution to this ..

Anonymous said...

hi,

i am jitheshfrom kerala. i have got the BSNL home plan. some tech guy came weeks ago and connected a UTStarcom UT300R2U modem for me. YestDay i rormated the system .however, i am not able to figure out how to get it configured.. i did not receive a cd, or a manual or anything! :(

Someone please give me step-by-step instructions on how to get it working?
please
mail to...
jitheshpnr@gmail.com

Justin said...

Hello Varun

Seems to be you are the best person to help me out. I am using BSNL (Bangalore) connection and my modem is UT 300R2U. Can you help me to :

(1) Port Forwarding : In the advance setup, NAT - DMZ host, there is an option. But heard that this is not the right way and not really safe. Is there any other option ?

OR

(2) Firware upgradation : As the current interface is so complicated and doesn't show me the same interface as I was able to see in some of the sites in the net, is there anyway I can upgrade the firmware so that I can get a different interface which is more simple to do the configuration

Awaiting your earliest resposne

Thanks and All the very best

Cheers

Justin
E-mail :justinphilip@hotmail.com

Sijju said...
This comment has been removed by the author.
Sijju said...

UT300R2U drivers :
http://assistenza.tiscali.it/download/file/300R2u_windows.zip
http://assistenza.tiscali.it/download/file/300R2u_macos.zip

Sijju said...

IF EARLIER LINKS DOESN,T WORK, THEN TRY THIS ONE...

UT300R2U - One more driver download link :

http://rapidshare.com/files/46287730/UT300R2U.rar

Sijju said...
This comment has been removed by the author.
Sijju said...

USB driver for UT300R2U works fine from the following link

http://rapidshare.com/files/46287730/UT300R2U.rar

I have tested and works fine.

This is a Winrar file(UT300R2U.rar).

If you do not have Winrar then search on google.com and download it for for free. It is just like Winzip.

rohan14_2006 said...

Hi varun
i have UTSTARCOM UT300R2U modem & i have reseted the modem so my original setting gets lost.
so i have to setup modem.
plz tell the configuration for this modem.
my id is rohan14_2006@rediffmail.com

rohan14_2006 said...

Hi varun
thanks for reply
i have reseted my modem UT300R2U and
i want to update my firmware. i have that updated software image. but when i do the update connection gets reset. & hence i am not able to update my firmware. i done this 10-12 times but i haven't got success.
so plz tell me about this firmware update.

rohan14_2006 said...

my id is rohan14_2006@rediffmail.com

fiona said...

problem with net connection+fedora combination


hello varun

i have bsnl connection for my pc
there is no problem for windows+net connection
i have configured linux fedora 7 for internet but problem is even if the internet is high linux will not connect 2 net if i switch back 2 window it will connect if i switch back 2 linux the pc signal in router will become low and it will not connect wat could be the solution plz help(fiona_mydear@yahoo.co.in

fiona said...

hello varun

i have bsnl connection for my pc
there is no problem for windows+net connection
i have configured linux fedora 7 for internet but problem is even if the internet is high linux will not connect 2 net if i switch back 2 window it will connect if i switch back 2 linux the pc signal in router will become low and it will not connect wat could be the solution plz help(fiona_mydear@yahoo.co.in)

Anonymous said...

First of all hats of to such a forum.. its a treasure of information out here..I wish i have my problem solved out by you guys out here.

I have 2 pcs and a dataone one connection and am using Huawei SmartAX841 modem, since i have 2 pcs i want to connect both of them for file and h/w sharing. and have 2 NIC cards installed on each of them.

However, iam unable to connect both of them through the MT841 modem which BSNL claims to be a router as well. I would be glad to have a step by step procedure.

Plz note ## i have already tried setting up home network using the network wizard but doesnt let me share files.. Help would be appreciated.. and THanks in advance.
Email id: -ashirwadzone@yahoo.com

adnan said...

hi
i lost my driver CD can u help me get the driver i would be extemely greatful to u thank u and my email id is aquib.adnan@gmail.com and yea am adnan here

Anonymous said...

Hi folk,
has someone sort out the problem with the ut-300r2u? I’m desperately looking for a firmware for this router! I’ve got one of those “Tiscali routers” modified by my ISP. Performances are hardly restricted! I can’t set LLC in ADSL parameter! Only VC! Where I can find an original firmware not restricted? Can one of you guys backup his original firmware so that I can upgrade mine?

Thankx!
eiem.it(at)tiscali.it

Hemant said...

hi everyone. I am Hemant from Delhi. I need USB driver of UT 300r2u for Vista 32bit. Please send it to hemant_832003@yahoo.com.

Srinavas said...

Hai Varun Iam srinivas from Andhra Pradesh,East Godavari,Amalapuram
Plase tell me how to configure my
Modem
BSNL Broad band Modem

UT300R2U ADSL2+ Modem
as you say below


Step by step guide to make the dialer in the modem working, for UT300R ADSL modem. By doing this, you dont need to do anything to connect to internet. If your modem is on, everything will work. No packages & no drivers need to be installed. Basic LAN between your system and the modem is enough!!!.

Please kindly reply me to my mail id ravindrait.amp@gmail.com
Thanking you
Srinvas
Amalapuram

Mr.Negi said...

HI varun
this is saif i m having UT300R2U rooter provided by bsnl.. i want to how to forward the port for my utorrent application .after loging into router (through 192.168.1.1) i cant find out the option for forwardin a port for any application..plz help me out i m geting very bad dowload speed for my torrent client application and it is telling port not forwarded properly
regards saif
linkin1abz@gmail.com

eshana said...

hi Varun,this is Eshana.
i need ur assistance to install UTSTAR 300R2 ADSL modem usb driver on open suse 10.3.the driver given in the cd works for kernel versions 2.4.....it doesnt work for the new one.please mail me at eshana.g@gmail.com

Anonymous said...

HI , i am Vivek from cuddalore.i hav BSNL UT300R2U modem with dataone connection.i hav dual OS-WINDOWS XP and FEDORA.i dont hav ethernet card.i use only USB.
how to connect to internet thro usb in fedora ?is it possible.plz reply .my mail vivekn_s@yahoo.co.in

vellur said...

hi varun
i am ranganathan from trichur,kerala
i have a dataone broadband connection which works fine on my desktop. I loaded ubuntu on my laptop.how do i set up my dataone account in my laptop?the modem they have given me is sterlite smartax mt 882

Raj said...

Hi Varun,
This is Rajasekhar from chennai. I have Huawei MT882 modem & it works fine in windows. My system has Federo 7 linux too. The USB driver that came with the modem is of 2.4 linux version. My federo 7 has got 2.6 linux. Now how do i install the usb driver for the modem?
you can mail me at
rajasekhar.pulluru@hotmail.com

Mukesh said...

Dear Mr. Varun,
I am mukesh from tezpur (assam)
I have a bsnl broadband connection.and utstarcom ut300r2u modem. I have not recd any cd with the modem. I am unable to configure it by usb, from where i can get the software for it. I want to use this connection in 2 pc. how is it possible and what needs to be doen. Please suggest. My e-mail Id is mukesh.pareek@yahoo.co.in

Tabrez said...

Hi this is Tabrez From Patna I have BSNL internet account, and have the UTSTAR 300R2 ADSL modem,
I want to configure the modem setting.so i have to setup modem. Also i have 3 computers at my house and have purchased the D-Link Wireless broadband router, DI-614+ model, can u help me to configure the router, im unable to do that

my mail Id is tabrez_karim@rediffmail.com

Varun S said...

Pasted from Mail:

Dear Varun,

This is to let you know that I managed to install USB driver for the
ADSL modem UT-300R2U on my Windows 98 SE machine. The driver supplied
by BSNL, or downloaded from a BSNL site did not work -- the
installation procedure using their file "setup.exe" stalled in
between. However, using the file

http://assistenza.tiscali.it/300R2u_windows.zip

which I think is identical in content to

http://rapidshare.com/files/46287730/UT300R2U.rar

unzipping it, and then using Control Panel of Windows to "add new
hardware", I mangaged to install the driver. (These links were
obtained from your site).

I went through the required set-up for the modem, so that I could
check that the broadband connection works. (As of now, I dont have a
username, so I could only use the test username they gave me, which
provided access only to the BSNL website).

So for now, I am not going to bother about an ethernet card.

I hope this information will help some others.

Best regards,
Saurabh

Anonymous said...

Here’s a Broadband Video that will show you how to check availability by postcode, how perform a broadband speed test and where to find broadband forums to answer your questions. There are also offers for Tiscali Broadband.

Here is a broadband beginners guide and below are common broad band questions;
>What is Broadband?
>Types of Connections?
>Connection speeds and download limits
>How to compare ISP’s

Karan said...

On my laptop, I am having Windows Vista and I am not able to install USB driver for the same which is provided by BSNL on CD.

Needed Help!!!!! urgently!!!!!!!!!

My email id is kemcho99@gmail.com

theansweris42 said...

hi...i have a ut300r2u adsl2+ router...also have a dlink wireless access point...how do i configure the network such that my laptop can wirelessy connect to the internet while my desktop can connect separately using an ethernet cable...im using a dataone connection which requires username and password

Anonymous said...

hi,
i am using the beetel 220bx adsl2+ modem. i checked the details of this specific model using the usual commands. i came across ecos/redboot. i am planning to write the busybox firmware for this. but i got no clue as how to proceed.
the openwrt URL is http://wiki.openwrt.org/BroadcomBCM63xxPort
and the ecos url for supported device is under mips32 classified as viper, this is not the motorola viper mips32 based thing. redboot got clear cut explainations as how to proceed. if anyone is ready to co-operate? may contact in IRC.
freenode/oftc/lfs/galaxynet/quakenet/efnet:knawppix/knawppix/knawppix/knawppix/knawppix/w33dt0k3
TIA
paul.
p.s. openwrt's work is also stalled. if anyone ready to volunteer and share the workload? welcomed and invited! thank you.
sign: if idiots could fly? MIRC is the takeoff runway; IF IDIOTS want to fly high? IRC is the definitive highway.

mohammed said...

HI , i am Anees from Bangalore.I hav BSNL UT300R2U modem with dataone connection.I hav dual OS-WINDOWS XP and FEDORA.i dont hav ethernet card.I use only USB.
how to connect to internet thro usb in fedora ?is it possible.plz reply .my mail rawanees@gmail.com

Rafeeq Manamal said...

Dear Friends,
I have Aztech DSL206U usb adsl modem which i was using at UAE. Can I use it for my dataone connection? While istalling software it give me options like:

Please choose the RFC you want to install:
Option 1:RFC1483 BRIDGED
Enter the VPI and VCI parameters given from your ADSL service providor
VPI
VCI
Please choose the ENCAPSULATION you want to install
RFC1483Bridge LLCSNAP
RFC1483Bridge VCMUX

Option 2:RFC1483 ROUTED
Enter the VPI and VCI parameters given from your ADSL service providor
VPI
VCI
Please choose the ENCAPSULATION you want to install
RFC1483Bridge LLCSNAP
RFC1483Bridge VCMUX

Option 3:RFC2364(PPP Over ATM)
Enter the VPI and VCI parameters given from your ADSL service providor
VPI
VCI
Please choose the ENCAPSULATION you want to install
RFC2346(PPPoA) LLCSNAP
RFC1483(PPPoA) VCMUX

Option 4:RFC2516 (PPP Over Ethernet)
Enter the VPI and VCI parameters given from your ADSL service providor
VPI
VCI
Please choose the ENCAPSULATION you want to install
RFC2516(PPPoE) LLCSNAP
RFC1483(PPPoE) VCMUX

Thanks in advance

Anonymous said...

When you hear broadband providers or your colleagues and friends talking about "wireless" they could actually

be talking about two separate things:Wireless

Networking
, having a wire free computer in the house connected to a broadband connection.
Broadband" href="http://www.broadband.co.uk/">Wireless Broadband
, this is a special kind of broadband package

where you can use it at home, but also in certain places when you are away from home. All you need is your phone

number or pastcode to see if either of these broadband connections are available and you can check it at

title="broadband.co.uk" href="http://www.broadband.co.uk/">broadband.co.uk
.

Shabaz Moosa said...

It has been mentioned earlier...
CAn u Plz tell me how to port forward my BSNL Router UT300R2U!
Or can any firmware Upgrade work...?

Plz reply at shabazmoosa@gmail.com

siva said...

I have a BSNL Broadband connection and the modem I'm using is UTSTARCOM (model no: UT300R2U) which is ADSL 2+ Modem/Router. I only have a laptop at home and am connecting to internet through the Ethernet port. I'm looking at setting up the wireless connection. Can someone pl. help me with the exact steps? Appreciate your help. You can email me at rsivakum(at)yahoo(dot)com.

sainathan said...

the usb driver for utstarcom ADSL2+
modem can be downloaded from the
below link

http://rapidshare.com/files/103832826/USB-Drivers.rar

vajrakumar said...

is any body having soft udate of the router ut300r2u ?
not usb or pppoe ............. like os for the router

venkatesh said...

venkatesh: I have bsnlbroadband multiuser connection. but it is not working as multiuser. How to config modem for multiuser please tell me.

Anonymous said...

Hi

I have recently purchased a Dlink 2640B modem/router for use with my BSNL connection and breaking my head trying to configure it. I was earlier using the BSNL supplied modem. Any help will be appreciated.

my email is meraccnt@hotmail.com

Thanks in advance

VS

abhijith said...

Hi varun,This is Abhijith from Hyderabad.I have a BSNL broad band connection.My modem model is UT300R2U ADSL Router, i have two computers at my home, Can you help me configure my router so that i can use the Net simultaneously on both the systems.

My Email ID is abhijithsimha@gmail.com

neerajnarang said...

someone please tell me how to install
utstar modem drivers in linux(fedora)
my email address is :
neerajtnt@gmail.com

Rajeev said...

Hi varun,
This is Rajeev from gorakhpur..
I have the Huawei SmartAX MT841. Please help me in configuring. I have 3 pc to connect and i have no idea how to configure it.

abhay said...

Hai, This is Abhay from Delhi,
I have BSNL Internet connection with Modem UTSTARCOm Model UT3000R2U. I have two PCs at home. I am unable to use both the PCs simulteniously. (one with RJ 45 jack and another with USB cable) Please guide me. Only PC which is logged first is connected to internet and other PC con not connect the internet

The Great Raisin said...

Hi, I am Rahul from Chennai. I accidentally reset my modem, and I lost all my settings, as a result of which I am not able to connect to the internet. I have a UT300R2U modem. When I connect my modem via Ethernet cable to the computer, turn it on and then enable the LAN connection, it gets connected successfully. The Power light, the DSL light, and the Ethernet light remain ON. But the Internet light does not light up at all. I have gone to 19.168.1.1 and tried changing a few settings, but with no avail. My email ID is emailrahulr@gmail.com. Could someone please send me step-by-step instructions to get my internet connectivity back please?

Dileep said...

I have 2Pcs Now I newly Installed BSNL Broadband with UTSTAT UT300R2U modem has one LAN one USB.

But I want to share the net between two PCs without HUB/Switch is it possible. some peoples says its possible?
I want both computers simuiltanously and independently accessing Internet
mail me ID: dileepg6@gmail.com

aswinrulez said...

You can read this blog post. Its easy with screenshots and all. Its on speeding up bittorent but also tell u on port forwarding
http://ihelpothers.blogspot.com/2008/05/how-to-download-using-bittorent.html

AVK said...

hello varun...

I ve a problem. I ve a BSNL (Chennai) UT300RTU ADSL 2+ Modem... I need to setup port forwarding for using my u torrents effectively... But I m unable to set it up... Could u please help me !!

harish said...

Hi, I use BSNL connection, UT300R2U/ADSL2+ modem.. I dunno how to Port forward... I checked in many sites and forums.. without use..

Vasanth said...

Hi, need a clarification. For UTStarcom 300R2U, the page for Save/Reboot is

Http://admin:admin@192.168.1.1/resetrouter.html

There's a Save&Reboot button.

Q: Is there any way to build a URL, which when clicked automatically Saves & Reboots ?

Anonymous said...

Sainathan ....
Thanks for the link dude

Anonymous said...

Sainathan
Thanks for the rapidshare link dude
bsnl modem

Easwar said...

am new to this blogging..lol

Anonymous said...

Hi,

Can anyone give the procedure to install ADSL Modem on Windows 2000 for BSNL broad band?

Girishprasanna said...

Hey Please Mail me the original firmware of ut300r2u not the bsnl one..the original one with many featrures..

MAil it to - girishprasanna@gmail.com

Thank You...

Anonymous said...

ACTUALLY I M USING A ZTE MODEM,I WANT TO USE INTERNET THROUGH DATA CABLE ,PROVIDED BY BSNL.BUT cd is unable to detect the modem connected through data cable..........pls give me some solution to sahilddd@gmail.com

Anonymous said...

hi guys i am shubham from pune
i have starcom ut300r2u .
i used to have xp 64 before on which i was able to perform port forwarding now i'm using vista ultimate(32 bit and 64 bit) but i have no clue abut how to go for port forwarding for des two. can anyone help me?
burner_1984@yahoo.co.in

ajith said...

i have bsnl conn with utstarcom UT300R2U modem .i need to open up a port.or.open a firewall.so please help me.send your reply at ajithchamp@yahoo.co.in.

bhupi said...

Hello guys,

i have Sterlite SmartAX MT 882 modem over BSNl, and I want to install USB driver of the modem on Windows XP , as I have no CD available so plz. help me out by giving some downloading links...

bhupi said...

i have Sterlite SmartAX MT 882 modem over BSNl, and I want to install USB driver of the modem on Windows XP , as I have no CD available so plz. help me out by giving some downloading links...

Reply me at bhupendrazone@gmail.com

Anonymous said...

hi dear
I have purchased viao vgn-cr313h workin with windows vista basic. I have BSNL broadband modem UT-300r2u
vista does not support the driver provided in the CD which i got from BSNL. can u provide a link by which i can get driver.
I would be very thankful to u
Rajat

nihal said...

hi all.....
this is the first time i sm posting.

For all users of UT300R2U

If u want to download from torrent effectively u have to do something called port forwarding.
But in UT300R2U u can't do that.

So, there is an alternative.

Go to the router confoguration page, then go to NAT, in that DMZ host and type in ur ipaddress (U can find out the ipaddress by typing "ipconfig" in the command prompt).

But a word of caution. this is not safe as it allows other people to get hold of ur comp.
so i suggest u change ur router admin password( by default it is admin only)before doin this.

after this ur torrent speed ll go high.
i have done this. trust me.
but change ur router admin password please.

nihal said...

actually everybody please change ur router admin password.

it dosen't matter if u have enabled DMZ host or not, people can access ur router aaram se with the username and password admin.

they can get ur internet username and password and access ur account.

so i strongly suggest u to change ur admin password and also ur internet connection password.

please........

nihal said...

if u have any queries please mail me at

"nihalvm(at)gmail(dot)com"

with the subject as ut300r2u or modem.
i ll reply to ur mails.

and i needed the new firmware for UT300R2U. anybody know where to find it. or if anyone has please mail me.

Anonymous said...

Hi how to install or configure BSNL DATAONE on Vista OS I have modem UT300R2U or Utstar modem is not detected in Vista. is it necessary to connect it using USB. i have tried it over LAN cable pls reply

Ameya Neurgaonkar said...

Hi Varun,
This is Ameya from Pune. I am in a little bit of a trouble here & would greatly appreciate your help. Lemme give a brief overview of the situation.
I have a HP dv6602au laptop with Win Vista(32 bit) & had to replace the motherboard. In this process i had to format my HDD & thus reinstall the OS. After doing this the BSNL UT300RTU modem i have from Dataone is not assigning an ip address to the laptop thru the LAN connection. The HP tech support said that I would need the recovery cd to get back the OS to factory default settings. I had not made the recovery cd when i had got the laptop. The easier way out of this is to connect the modem vis the USB right? So after i tried installing the modem USB drivers with the cd, it faltered. The installation always aborted. Tried finding the USB drivers for vista online but couldnt manage. SO plz plz plz lemme know a solution to this problem i am in. Would greatly appreciate your help! Can get in touch with me on ameya.neurgaonkar@gmail.com

Aman Singh said...

hey ppl a lil help here please...i hv gt a UT300R2 modem..n i'm havin a lil prb in dat...its internet light automatically gets on even when m not connected to the internet...n doesn;t allow me to access the internet....m fed up of these fuckin prb man!!!

please..is anyone has gt a solution..plz do share it wth me..i wanna fix it up !

u can also mail me @ singhgurnoor@yahoo.co.in

m really in need...do help me..thnks in adv to ya ppl!

vijay said...

Hai Varun.I am a software engineer.I am glad that i am talking to a google employee.I have a doubt,but everything is working fine.I have two modems huwaei and Utstarcom modem(wireless capability).I have connected my huwaei modem to rj splitter socket.(connection line directly from bsnl pole).In my Huwaei modem i have one port for ethernet and one for USB.I have totally three computers.I have connected the usb port(huwaei) to comp1 and ethernet port of the same(huwaei) to comp2.
There are three ethernet ports in my startcom modem.I have connected one of them to comp2.I am using net in my laptop through wi-fi.Can you give me a clear picture of the network.Please help.I want DHCP enabled.When i use it,i get a message saying ip address conflict.So i manually assing three different ip addresses.Thanks in advance

Manjunath said...

Hi,
I am manjunath from bangalore, I have 2 Broadband connection one is airtel and other is BSNL with different modems. Airtel is working fine but in BSNL (UT300RTU Modem) is also working fine if i connect it directly to PC. but in my office i have D-Link DI-LB 604 load balancing router. I want to connect both internet to 2 WAN ports in Dlink 604 router. Airtel is showind connected, but BSNL is showing disconnected in router. Airtel I configured to WAN1 and BSNL to WAN2 for backup purpose. Airtel is connected with Public IP and BSNL in pppoe connection. my qutestion is there any settings i want to do in BSNL modem? please help me.
thanks in advance.

manjunath
manmys@gmail.com

vansh said...

Hi,
I have taken BSNL Broadband and i have connected ASDL Modem. Due to some reason my LAN Connection and Broadband connection installed differently. So whenever i start my pc i have to first connect LAN Connection then after i have to connect Broadband Connection through PPPOE through WAN. But still i am not enjoying broadband speed. So please let me know how to connect in a proper way so i can able to use Broadband effectively.

vijay said...

Well,I think u need to go to your portal page i.e. 192.168.1.1 and select pppoe option.Which will authenticate and get connected automatically whenever you switch on the modem.With respect to your internet speed, please be more specific about it??

Varun S said...

If you have issues with the speed, please quantify it. the best way to do that is to goto sites like http://www.speakeasy.net/speedtest and check your speed (note that often your traffic is directed to some place outside BSNL network. So its a wise idea to speed test with some site which is outside India). If that is too low for the connection speed you subscribed to, then you really have a problem in terms of speed.

rangashish said...

I have 2Pcs Now I newly Installed BSNL Broadband with UTSTAT UT300R2U modem has one LAN.

Before performing the below i have tried system sharing using an ethernet d-link switch and cat-5 cable it works.

But I want to share the net between two PCs without HUB/Switch is it possible. some peoples says its possible?
I want both computers simuiltanously and independently accessing Internet

and i came 2 know that it is possible to share net and access broadband simultanously and i should change a settings in bsnl home site 192.168.1.1 but i could able understand wat are the settings to be done for access b.b parallelly...
so any one can please tell me or guide me in wat way i can b able to modify d settings to access net parallelly
please send ur suggetions to my email id its:

rang007ashish@gmail.combansir

vijay said...

Well you dont need to change any settings in 192.168.1.1.I am assuming that you are having type 1modem.You have one usb port and one ethernet port.Use them to connect to your computers.As far as internet sharing is concerned,there is an option in windows for sharing the internet connections.(both the comps will share the same IP. and it creates a file called share.img)option is in control panel.

Anonymous said...

Hi Varun,

I have a UT300R2U modem which i need to use for my BSNL broadband connection.I have connected the modem via LAN and I tried configuring it through ethernet from IE with an IP 192.168.1.1 but the page did not open up.I dont have the driver cd of this modem.Is the driver needed only when the modem is connected through USB or is it needed also when connected through LAN also? If yes then please mail me the driver to laya_bpl@yahoo.com.Also if the modem is connected through LAN then is the modem supposed to be displayed in the Phone and modems option under device manager in PC?
Thanks

chandrashekara said...

Dear Sir,

i am having BSNL broadband connection of Rs.250 plan which provides me to download 1GB per month.

But my problem is from opening of the internet immediately starts to downloads untill my closing of PC (and it will consider as i am downloading)

because of this i got a bill for Rs. 6000/-

My friends telling that you have to change the setting from AUTO TO MANNUAL Download

please tell me how to change the same

my mail address is hrcsetty@gmail.com


please help me

Varun S said...

The best way to avoid this problem is to switch off the modem when you are not using. Also you need to figure out which is using the network so much. May be its a spyware/rogueware. Please update your virus scanner and firewall to the latest signature and scan your system. If you know what you are doing, you can sniff the packet transfer and see where these packets go and take appropriate action. The best interim solution till then would be to install a firewall.

-V

Rupesh said...

Hi Varun, I'm Rupesh & frm Dehradun.I have dataone broadband connection at home(modem: C2110 SAMSUNG). i'm having a system with dual boot os(WinXP and Red Hat 5) i have no problems with winxp for connecting to internet.. bt i couldnt connect to internet with Linux... i'll be grateful to u if u provide step by step instructions for connecting to internet.. i'm a linux novice user.. my mail id is rupeshkarki@gmail.com.. thanks in advance... thank u very much

Shyam Naren said...

Hi Varun,This is Shyam from hyderabad. Can you please give me a step by step procedure to connect to BSNL in OpenSUSE11.0
I am new to Linux so pl help me out. My email address is shyamnaren311(at)gmail.com

sudip roy said...

Dear friends,
I have Windows 98SE and cannot install UT-300R2U. Please guide me of how I cam use ethernet in Windows 98 to connect to internet.
lease mail to:
sudipta10in@yahoo.co.in
Thanks and regards
sudipta roy

sachin said...

Hi there, i have a UTSTAR 300R2 modem. recently its acting quite weird. my connection use to hang up for a while and i use to wonder why and i use to restart my machine or it use to automatically set right. i recently observed that it restarts by itself. May be all this time it use to restart, i dont know, So do you think i can do anything to resolve without running behind the BSNL chaps

masterblastin_101 said...

HI Varun, This is Srinivasan From chennai who have BSNL internet account, and have the UTSTAR 300R2 ADSL modem, now i have 2 computers at my house and have purchased the D-Link ADSL router, DSL-502T model, can u help me to configuret the router, im unable to do

masterblastin_101 said...
This comment has been removed by a blog administrator.
pema said...

i have bsnl broadband internet connection with ADSL MODEM C2110.
butn i having problem with connection and dropping the line and showing error 678 every time.
so what can i do for?

Jayan said...

Those with UT300R2U Modem can go to http://www.associatedcontent.com/article/2179887/using_bsnl_ut300r2u_modem_for_dual.html and get a step by step procedure for getting the modem configured. This is a nice tutorial which I found..

Thanks

software said...

hi i am prem from chennai.i have a bsnl broadband connection wit UTSTARCOM 300R2U ADSL modem.my internet light is not glowing.when enquired with bsnl office they are saying its a problem with modem.do i need to buy new one or have to re configure it??.can you help me.if so, send to premgin23@gmail.com. thanks in advance..

Arun said...

hi can anyone help.i got a laptop. can anyone help me how to connect the internet using the sterlite adsl modem with usb connection.please let me know how to setup the connection.
mail me at
arunsekhar2@yahoo.co.uk

Anonymous said...

I have UT300R2U BSNL MODEM, how to configer to my own pls tel me any one step by step prcedure.

pls send me email:
prinka2020@gmail.com
prinka from hyd,

Anonymous said...

Hi Varun..
Steve here for Blore..I'm using Bsnl Adsl2+router UT300R2U..
My prob is i want to enable virtual server/port forwarding..I learnt tat it comes under NAT options..But i got only DMZ Host in it..Can u Pls tel me how to enable virtual server..
Thanks in advance.
stevefernandes99@yahoo.co.in

Anonymous said...

Hi Am using Nokia siemens 1600 router.It works finely but under its own pre determined Dns servers of Bsnl. is there any way i can use open dns

elevate said...

This is ravi from Delhi. I have Huawei MT882 modem & it works fine in windows. My desktop has Federo 4 linux. Please mail me the drivers download link and the procedure to connect the system to the internet after installing drivers.you an mail me the procedure at:elevate.consultant@gmail.com

rajesh said...

Hi,
I have the UTSTAR 300R2 ADSL modem.Iam having fedora 2 on one of my partitions.The hardware browser finds broadcom network interface with unknown drivers.I know a bit of editing etc.fstab and ./configure commands.How to make my modem work on linux.

Dr.Vijayalakshmi said...

Hi,

I am viji from Mangalore. I want your advice regarding which usb broadband modem I should purchase.
Thanks
add vrshetty@hotmail.com

Anonymous said...

hi
i have bsnl broadband
i have lost the setup cd
from where can i get t setup online??
also earlier it was installed in xp now i hv formatted and installed vista so how can i get a setup combatible wit vista???
pls reply on viniwitty@gmail.com

Anonymous said...

Hi Guru whoever it is. I have BSNL BBAND CONECTION. Modem is ZTE ZXDSL531B. All is fine. my PC has been configured to this and i am enjoting the service. NOW THE PROBLEM?? I have a laptop also. I want to tap the wireless service from this ZTE and configure my laptop ; so that if i come anytime i can use the Bband thro this laptop. ANY ONE PLEASE ADVISE. I DONT WANT TO CALL UP BSNL due to EGO PROBLEM.
also mail meat mithra_agencies@bsnl.in

Anonymous said...

Easy Earning money in online never been this easy and transparent. You would find great tips on how to make that dream amount every Day.Sitting in the home earn around $100 perday. So go ahead and click here for more details and open floodgates to your online income. All the best.
Thanks.

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me immediately as you check this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

satya said...

Hi Srinivas! can you help me in solving my problem. I had a BSNL bb eth0 connevtion and xDSL connection, but with some problem I cannot activate my xDSL PPP0 device. Can you help me. If you can please email me as you see this and my email ID is satya.satyanarayana.narayana4@gmail.com

Swetha said...

hats off to sainath... thanks sir...

yajur said...


Wonderful blog & good post.Its really helpful for me, awaiting for more new post. Keep Blogging!









Computer Repair in Chennai

Anonymous said...

I had bought a new modem in BSNL HUAWEI E303F 14.4 mbps 3G I didn't know that how to connect it with my laptop Windows 7 please give me the instruction clearly and immediately i am waiting for your reply

Yash Khare said...

Hi, I am yash from Chhatarpur mp. I accidentally reset my modem, and I lost all my settings, as a result of which I am not able to connect to the internet. I have a NOKIA SIEMENS NETWORKS Residential Router 1600 modem. When I connect my modem via Ethernet cable to the computer, turn it on and then enable the LAN connection, it gets connected successfully. The Power light is on , the DSL light is on, and the Ethernet light remain off wlan light is off status light remains off. But the Internet light does not light up I have gone to 192.168.1.1 and tried changing a few settings, but with no avail. My email ID is yash.khare00@gmail.com. Could someone please send me step-by-step instructions to get my internet connectivity back please?

Anonymous said...

Hi sir
Can i connect already configured bsnl modem (in pc) to my laptop.

Email. :arunmh7@gmail.com